BMW R 1200 GS ADVENTURE Servisní příručka stáhnout pdf (Strana 83)

Starting engine

Kill switch in run position a.

Switch on the ignition.

Pre-ride check is performed.

( 79)

with BMW Motorrad Integral

ABS II

ABS self-diagnosis is

performed. ( 80)

with Automatic Stability Con-

trol

ASC self-diagnosis is per-

formed. ( 80)

Press starter button 1.

If ambient temperatures are

very low, you might find it

necessary to open the throttle

slightly when starting the engine.

At ambient temperatures below

0 °C, disengage the clutch after

switching on the ignition.

The start attempt is auto-

matically interrupted if bat-

tery voltage is too low. Recharge

the battery before you start the

engine, or use jump leads and a

donor battery to start.

The engine starts.

Consult the troubleshooting

chart below if the engine re-

fuses to start. ( 146)

Pre-ride check

The instrument panel runs a test

of the 'General' warning light

when the ignition is switched on:

this is the "Pre-Ride-Check. The

test is aborted if you start the

engine before it completes.

Phase 1

The "General" warning light

shows red.

CHECK! appears on the dis-

play.

Phase 2

The "General" warning light

shows yellow.

CHECK! appears on the dis-

play.

Riding

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 179 180

Komentáře k této Příručce

Žádné komentáře

BMW R 1200 GS ADVENTURE Servisní příručka Strana 83

Komentáře k této Příručce

Související produkty a manuály pro Motocykly BMW R 1200 GS ADVENTURE