Push the air filter into the air
filter housing at the bottom,
making sure that the vanes are
not bent.
Position the air intake pipe on
the air filter housing and push it
into holder 2.
Push retainers 1 into the hold-
ers until they engage with an
audible click.
Cylinders not synchronised.
Make sure the throttle-valve
cable is correctly routed.
Check that the throttle-valve
cable is seated in guide 4 of
the intake and that the throttle
valve is seated against the
stop.
Seat the fuel-tank cover
in holder 7 and install two
screws 6.
Press the side cover at 4
and 5 to engage it in the
holders.
Install screw 3.
8
134
z
Maintenance
Komentáře k této Příručce