BMW R 1200 GS ADVENTURE Servisní příručka stáhnout pdf (Strana 121)

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Measure the tyre tread depth

in the main tread grooves with

wear marks.

Tyres have wear indicators

integrated into the main

tread grooves. The tyre is worn

out when the tyre tread has worn

down to the level of the marks.

The locations of the marks are

indicated on the edge of the tyre,

e.g. by the letters TI, TWI or by

an arrow.

If the tyre tread is worn to minim-

um:

Replace tyre or tyres, as applic-

able.

Checking rims

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Visually inspect the rims for

defects.

Have damaged rims checked

and, if necessary, replaced by a

specialist workshop, preferably

an authorised BMW Motorrad

dealer.

Checking spokes

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Draw the handle of a screw-

driver or a similar instrument

across the spokes and listen

to the notes of the individual

spokes.

If the notes vary:

Have the spokes checked by a

specialist workshop, preferably

an authorised BMW Motorrad

dealer.

Wheels

Tyre recommendation

For each size of tyre BMW

Motorrad tests and classifies

as roadworthy certain makes.

BMW Motorrad cannot assess

the suitability or provide any

guarantee of road safety for other

tyres.

BMW Motorrad recommends

using only tyres tested by BMW

Motorrad.

You can obtain detailed informa-

tion from your authorised BMW

Motorrad dealer or on the Inter-

net at www.bmw-motorrad.com.

Effect of wheel size

on suspension-control

systems

Wheel size is very important as

a parameter for the suspension-

control systems ABS and ASC.

In particular, the diameter and the

width of a motorcycle's wheels

8

117

z

Maintenance

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 179 180

Komentáře k této Příručce

Žádné komentáře