BMW R 1200 GS ADVENTURE Servisní příručka Strana 126

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 180
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 125
the brake lever is pulled or the
brake pedal depressed.
Operate the brake several
times until the brake pads are
bedded.
with BMW Motorrad Integral
ABS II
OE
Clip on retaining clips 1 holding
the sensor cable to the brake
line.
Check that the sensor cable is
held securely at clip 3; if ne-
cessary clip the cable into the
clip.
The cable of the wheel-
speed sensor could chafe
through if it comes into contact
with the brake disc.
Make sure that the sensor
cable is routed correctly.
Make sure that the sensor
cable is routed as shown
here.
Remove the rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Engage first gear.
Parts of the exhaust system
can be hot.
Do not touch hot parts of the
exhaust system.
Remove studs 1 from the rear
wheel, while supporting the
wheel.
Lower the rear wheel to the
ground and roll it out to the
rear.
Installing rear wheel
Possible malfunctions when
ABS and ASC systems in-
tervene if non-standard wheels
are installed.
8
122
z
Maintenance
Zobrazit stránku 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 179 180

Komentáře k této Příručce

Žádné komentáře